Hjem / Nyheder / 2020 / Nyt produkt fra Mini Motor i Italien

FC3 24V BRUSHLESS SERVOMOTOR FOR FORMAT CHANGES

12.10.2022

MOTOR:brushless three-phase 4-pole sinusoidal motor, totally enclosed. Rotor with NdFeB magnets. Thermal cutoff. Winding Class F. Thermal cutoff. Protection IP65 in compliance with IEC/EN 60529 standards. Bearings with reduced backlash and special grease for high temperatures.

DRIVE:Power 24 and/or 48 Vdc • Magnetic absolute encoder SSI (12bit single-turn / 20bit multi-turn) with internal buffer battery• USB port for parametrisation • Torque, speed, position and homing control. • Fieldbus supported: Canopen, Modbus RTU, EtherCAT, EthernetIP, Powerlink, Profinet.

GEAR UNIT:with die-cast aluminium body (UNI 5076). 20 mm centre distance. CARO bronze crown, hardness of 120÷160 HB. Fluorocarbon polymer sealing rings (FPM). Lubrication with synthetic oil (EP).

SERVICE:Duty S3 25% over 10 minutes at nominal torque.

Technical details:

  • Nominal torque: 3Nm
  • Rated Speed: 125 rpm
  • Power output: 45W
  • Operating cycle: S3 25% over 10 minutes at nominal values
  • Fieldbus: Canopen, Modbus RTU, EtherCAT, EthernetIP, Powerlink, Profinet.
  • IP 65

Powermec - Danmark

Du bruger en gammel browser

Gamle browsere har kun delvis understøttelse af ny teknologi og giver ikke hjemmesiden en honset chance for at leve op til sit fulde potentiale. Du kan nemt downloade en anden webbrowser, der fungerer bedre. Her er kun et par moderne browsere, der fungerer godt!

Opdater min browser

Jeg vil alligevel gerne fortsætte